Tuesday, February 15, 2011

Error E13 on Canon MP258

This time I will discuss the E13 Error on the MP258. This incident may be quite confusing for who have never experienced it. OK just go to the scene ...

Early indications: When the printer is turned on the LCD panel shows the number 1 and looks OK, but after the print command, it will show error E13 on this MP258. Here's a picture which appears on the screen:




How to Cope MP258 Error E13:

1. If the E13 error appeared in the picture above, means the color catrid need reset (having runout).
2. How: press the STOP / RESET bit longer to rotate the LCD panel, then release.
3. If an error occurs again E13, means black catridge also need a reset (having runout), and the picture is as follows:



4. Same way: press the STOP / RESET bit longer to rotate the LCD panel, then release.
5. Done, printer MP258 error E13 which will be normal again.

This often happens when the cartridge runs out finished refilled and then installed again.

Good luck ...

No comments:

Post a Comment